Guitar Tuning Issues- Part 3

Another Tuning problem is an unsecure nut. On guitars with locking tremolos, make sure that the screws that hold the nut assembly to the neck of the guitar are tight. On a standard style nut, its imperative that the slot of the neck in which the nut sits is tightly bound to the nut itself. Usually, on steel string and electric guitars, nuts are glued in place with cyano acrolite, super glue in otherwords. Although this is a strong bonding agent, its not entirely permanent and can loosen or break free. If this happens, every time you bend a string or vibrato a note, you could be altering the position of the nut-and thus the tuning of your axe.

Another nut related problem is when the pitch of a string jumps sharp. This freak of tuning occurs when the nut slots are not cut properly. If the slot is too narrow, it will pinch the string and hold it in place. Eventually, when enough pressure or tug is exerted, the string will jump up a little in the saddle slot, increasing the tension of the string and raising its pitch. Optimally, you want the saddle slot of the nut to be slightly wider than the gauge of the string. This problem is pretty easily corrected using slotting files, but dont try this yourself if your inexperienced. A qualified repairman is always your best bet to fix an unsecured or improparly cut nut, and neither of these operations is particularly costly.

This concludes my tips on tuning issues. I know at some point you have all experienced them, and may still continue to experience them, so I hope this helps you out and you can start enjoying your guitar playing more without falling out of tune continuously. Keep Rockin!!!